FLASHit Developer

The Version FLASHit developer is designed for developer test laboratory and production to programm In-Circuit flash memory.

With the programming tool FLASHit data (firmware) can be written in a MCU target system. Data can also be restored from the Flash memory of a MCU target system as hex or binary file. FLASHit can be controlled from other applications,or by batch mode using commandline parameters. All current Windows versions are supported.

Supported Controllers e.g.:

Infineon:
C161, C164, C165, C167, XC161, XC164, XC167, XE162, XE164, XE167, XE169, XC2200, XC2300, XC2700

STMicroeletronics:
ST10F1x ST10F2x / STM32F-1 Cortex-M3, STM32F-2 Cortex-M3

NXP:
ARM Cortex-M0 LPC1100 / ARM Cortex-M3 LPC1300, LPC1700 ARM 7 LPC2100, LPC2200, LPC2300, LPC2400, LH7

SiLabs:
C8051

Micronas:
SDA6000, SDA6001, M2

8 bit	16 bit	32 bit	32 bit	Features
SiLabs C8051	Infineon STM10	STM32 Cortex M3	NXP M0/M3 ARM7
√	√	√	√	Works with all current versions of Windows
√	√	√	√	Upload Format: Binary
√	√	√	√	Upload Format: Intel-Hex
		√	√	Upload Format: Motorola-SRecord
√	√	√	√	OnChip FLASH*
√	√	√	√	Read out FLASH memory
√	√	√	√	Sector Analysis
	√			External 8 and 16 bit FLASH memory
√	√	√	√	controlled by commandline
	√			supports Chipselect 0-4
	√	√	√	Upload via RS232-Interface
√				Upload via USB/C2-Interface
√	√	√	√	Analysis of Upload files
√	√	√	√	Start Application
√	√	√	√	build CRC from FLASH
√	√	√	√	build CRC from file
√	√	√	√	compare CRC
√	√	√	√	auto Boostrap-Mode
√	√	√	√	Reset after Upload
√	√	√	√	Chip-Erase
√	√	√	√	Sector Erase
	√	√	√	Upload into RAM
	√	√	√	Start Application in RAM
	√			Test external RAM
√	√	√	√	FLASH Data View
√	√	√	√	RS232-Terminal
	√			Set- SFR Register
√	√	√	√	user defined Upload-Sequence
√	√	√	√	Debug Functions

Programming Interface (Circuit)
8 bit SiLabs C8051
16 bit Infineon / ST10
32 bit STM32 ATM Cortex M3
32 bit NXP ARM Cortex M0/M3 ARM7